B1.20.1 Pipe Threads - Conforms to pipe thread
ANSI B16.1 Cast
Iron Flanges and Flanged Fittings -Conforms to wall thickness, flange
dimensions, materials, pressure/temperature ratings, markings and hydrostatic test
ANSI B16.5 Pipe Flanges and Flanged
Fittings - Conforms to flange thickness, diameter and drilling requirements.
ANSI B16.10 Face-To-Face Dimensions -
Conforms to globe style control valve face-to-face dimension requirements.
ANSI B16.25 Butt-welding Ends -
Conforms to requirements of Schedule 40 or Schedule 80 pipe, without backing rings.
ANSI B16.34 Valves,
Flanged and Butt-weld - Integral flanged valve conforms to wall
thickness, materials, pressure/ temperature ratings, markings, and hydrostatic test
ANSI B16.37 Hydrotesting
of Control Valves - Conforms to hydrotesting requirements.
70-2 Control Valve Seat Leakage - Conforms to Class II, III, IV, V, and VI shutoff
requirements. Class V shutoff available on application.
S75.01 Flow Equations for Sizing Control Valves.
ISA S75.02 Control Valve Capacity Test
Procedure -Conforms to flow capacity test procedure requirements.
ISA S75.03 Uniform Face-To-Face
Dimensions for Flanged Globe Style Control Valves - Conforms to face-to-face dimension
ISA S75.12 Face-To-Face Dimensions for
Socketweld End and Screwed End Globe Style Control Valves -Conforms to face-to-face
ISA S75.15 Face-To-Face Dimensions for
Buff-weld End Globe Style Control Valves - Conforms to face-to-face dimension
MSS SP25 Standard Marking System for
Valves, Fittings, Flanges, and Unions - Conforms to marking requirements for flanged,
screwed and weld end fittings.
MSS SP84 Steel Valves, Socketweld End
and Threaded End - Conforms to end connection requirements.